K700
The K700 impresses with a hook height of 34.5 m and a maximum load capacity of 1.6 t. Numerous technical features noticeably facilitate the daily work of roofers, carpenters and facade builders.
Despite its compact dimensions, the crane offers enormous lateral reach. This allows loads of 250 kg to be easily transported to work areas 30 m away. The double hydraulically telescopic folding tip makes it particularly flexible and ideally suited for use in urban environments.
The K700 is also available as an optional K700 E with a battery-powered electric motor. A powerful battery pack combined with optimized power consumption control enables a complete workday of self-sufficient crane operation. Stage operation is also possible for extended periods without recharging. The K700 E is conveniently charged via a conventional 230V socket, making it particularly flexible in daily use.
Features
Drive type:
Support
- Fully hydraulic support with ASC support monitoring enables continuously variable support widths – also in the discharge direction
- Maximum flexibility in the setup for optimal use of space and load-bearing capacity
- massive L-shaped outrigger form for maximum tipping stability
- Outriggers without sub-construction thanks to long, vertical cylinders
Automatic setup
- faster and easier setup of the crane via radio remote control
- continuous lateral extension of each individual outrigger
- Automatic leveling of the support cylinders for optimal construction even on uneven surfaces
- Permanent pressure monitoring automatically adapts to changing external conditions
double luffing cylinders
- torsion-resistant lifting of the boom thanks to two luffing cylinders
- double cylinders for double safety
- Improved reception of lateral guides for a more stable and calmer stand of the boom
infinitely rotatable
- high-quality slewing ring from German brand manufacturing
- The well-designed rotation mechanism allows for endless rotation of the upper carriage in both directions
Mast system
- extremely strong and weather-resistant special aluminum alloy with low dead weight
- No loss of strength in the weld seam thanks to friction stir welding – the joints are as tight as the solid material
- Klaas' typical hole pattern reduces wind attack surfaces, minimizes dead weight, and ensures high buckling stiffness
- Movable cables are integrated into the mast and therefore optimally protected
- low-maintenance hydraulic piping eliminates the need for complex hydraulic hose changes
hydraulically telescoping jib
- Hydraulic telescopic adjustment of the folding tip elements conveniently via the radio remote control
- simultaneous extension of the extensions for optimal load distribution
- Use of the folding tip even in tight setup situations thanks to „extending it in the air“
- Telescoping possible under load and during platform operation
Folding jib
- The joint plate is milled „from a solid material“, thus enabling higher load capacities
- Electronic monitoring in the joint guarantees optimal load absorption in every angular position
- Double folding pointed cylinders for additional safety and protection against lateral forces
Telescopic winch
- Rapid telescoping under load thanks to patented Klaas rope technology
- Integrated electronic length measurement records the current mast extension length and calculates the maximum possible load capacity
- low dead weight of the ropes increases outreach and load capacity
- low-maintenance and easily accessible rope technology
96-volt battery-powered electric motor
- silent and low-emission operation thanks to modern 96-volt battery technology
- Energy-efficient crane control combined with a large battery system for long service lives
- Charging of the energy storage via 230-volt socket
- intensive aerial work platform operation possible via battery
Diesel-powered mobile cranes
- separate powerful diesel engine for crane operation
- Low fuel consumption – resulting in high cost savings and environmental relief
- no load on the truck engine from crane operation
- Electronic tank monitoring on the crane with display via remote control
Hybrid-powered mobile cranes
- Equipped with electric motor (400 V) and separate diesel engine
- Electric motor for quiet and cost-effective operation without exhaust fumes
- Use of the separate diesel engine on construction sites without power access
Crane control
- complex control system according to EN 280 and EN 13000
- modern safety PLC for reliable crane operation
- CAN-BUS control block for precise and sensitive work
- smooth start-stop for low-vibration work
- optionally expandable with additional remote control
Remote control
- precise and sensitive control through high-quality joysticks
- Clear display of the most important operating conditions such as tilt and rotation angles, max. Lifting force, lifting rope speed
- high operating comfort and safe control during crane operation
- optionally with memory function for saving and automatically starting defined target points (hold-to-run)
- flexible power supply via standard batteries or cable
Full fairing
- spacious, lockable storage compartments
- safe storage of tools and accessories
- large storage area on the vehicle
- high-quality, clean overall appearance thanks to aluminum sheet
GPS tracking
- Trackunit's tracking system captures important machine and operational data such as usage, maintenance, and battery status.
- Remote fault analysis by Klaas service staff to reduce downtime
- Support with billing, logistics and efficient equipment rental
- easier location of equipment in case of theft
Personnel safety mode
- Personnel safety according to BG guidelines
- Enables working at high altitudes without stationary safety features such as scaffolding or safety eyelets
- Securing people with a crane boom allows free work in exposed locations
Accessory fixing system
- Accessories safely stored and ready at any time
- no annoying lashing necessary
- custom-fit brackets ensure safety in road traffic
- Equipment of the crane with individually desired brackets
Aerial work platform
- Rapid and tool-free conversion of the crane into a fully-fledged aerial work platform
- equipped with a 230V socket and standard lashing points for personal safety
- Platform can be swiveled 45° to each side
Mounting/glass hook
- Mounting hook for pinpoint material transport
- Application, e.g., glass installation with vacuum lifter
- Flexible adjustment of length and tilt angle facilitates difficult assembly
GPS tracking opt.
- Trackunit's tracking system captures important machine and operational data such as usage, maintenance, and battery status.
- Remote fault analysis by Klaas service staff to reduce downtime
- Support with billing, logistics and efficient equipment rental
- easier location of equipment in case of theft
Technical data
| Load | Reach | Height |
|---|---|---|
| 1,600 kg | 6.00 m | 23.00 m |
| 1,000 kg | 14.00 m | 17.50 m |
| 750 kg | 17.00 m | 13.50 m |
| 500 kg | 18.00 m | 23.00 m |
| 350 kg | 24.00 m | 14.00 m |
| 250 kg | 30.00 m | 10.00 m |
| Parameters | Value |
|---|---|
| Hook load (stand./opt.) | 1.6 / - t |
| Hook height | 34.5 m |
| Total weight | ≥ 7.5 t |
| Extension length | 36.50 m |
| Outrigger width (min.) | 3.03 m |
| Outrigger width (max.) | 5.29 m |
| Winch pull force | 1,600 kg |
| Boom (1,600 kg – 350 kg) | 5.11 - 11.91 m |
| Extension 3 (250 kg) | 14.07 m |
Load charts
Crane operation
Platform operation with HA2/200 and HA 2/450°
