Mobile cranes

The K910 impresses with its hook height of over 39 m as well as its enormous strength. Its maximum load capacity is 5,000 kg, the lateral outreach with a load of 1,000 kg is 25 m. Equipped with a 2-fold hydraulically telescopic fly jib and a V-shaped outrigger with a maximum width of 5.94 m, the crane can be easily set up even where space is limited. The K910 is extremely manoeuvrable on an 18-tonne truck with a short wheelbase and is the ideal machine for inner-city areas.

The K910 is also available as an electric crane: with the K910 E, a large 70 kWh storage unit ensures flexible working without a power connection. If the energy storage unit is empty, it can be recharged via a 230-volt socket, a high-voltage connection or a wallbox for electric cars. In conjunction with a consumption-optimised crane control system, the powerful battery system guarantees long running times in crane and platform operation.

Equipment

Telescopic winch

  • quick telescoping under load thanks to patented Klaas rope technology
  • integrated electronic length measurement records current extension length of the mast and calculates maximum possible payload
  • low net weight of the ropes increases range of action and payload
  • low-maintenance and very easy to reach rope technology

Energy supply

  • protected routing of all moving electrical and hydraulic leads in or on the mast
  • no hose or cable reels on the mast
  • low-maintenance hydraulic pipework made of galvanised steel used in the substructure, meaning there is no need to change hydraulic hoses

Double derricking cylinders

  • boom raised with low torsion thanks to two luffing cylinders
  • double safety due to two cylinders
  • better absorption of lateral guide forces, making the boom more stable and still
Video: Double derricking cylinders

Drive concept

  • separate powerful diesel engine for the crane operation
  • low fuel consumption meaning enormous cost saving and reduction of environmental impact
  • the truck engine is not put under strain by the crane operation
  • electronic tank monitoring on the crane and display via the remote control unit

Twin luffing cylinders

  • folding jib joint is milled "from the solid" and thus enables higher load bearing capacity
  • electronic monitoring in the joint guarantees optimal lifting of loads in any angular position
  • twin luffing cylinders for even more security and protection against lateral forces
Video: Twin luffing cylinders  

Automatic levelling

  • the crane is completely set up quickly and easily using the radio remote control
  • each individual support infinitely extends laterally
  • automatic levelling of the support cylinders for optimal set-up even on uneven surfaces
  • constant pressure monitoring reacts to changing outside conditions

Boom system

  • extremely strong and weather-resistant aluminium special alloy with low net weight
  • no strength loss in the welding seam due to stir welding process, joints are as strong as the solid material
  • typical Klaas hole pattern ensures smaller wind-exposed areas, low net weight and high dent resistance

V-Outriggers

  • fully hydraulic support in conjunction with the ASC support monitoring system enables infinitely variable support widths, also in the direction of the range of action
  • no fixed increments that restrict the operator
  • l-shaped support ensure best possible safety against overturning
  • support without underpinning thanks to long, vertical cylinder

Crane control system

  • complex control system according to EN 280 and EN 13000
  • ultra-modern safety PLC for the crane operation
  • CAN BUS control block for particularly sensitive and accurate work
  • soft start/stop for low-vibration work
  • extension with additional remote control possible

Full panelling

  • spacious, lockable storage compartments
  • safe storage of tools and accessories
  • large storage space on the crane
  • the aluminium chequer plate design gives the crane a high-quality and clean look

XL Radio remote control

  • precise starting thanks to sensitive joysticks
  • memory function learns two target points (e.g. where material is on the ground and unloading point on the roof), during which the crane moves in safe hold-to-run mode
  • second display ensures all the crane’s key operating statuses are clearly displayed, such as angle of inclination and rotation, max. lifting capacity, hoisting cable speed
  • power supplied by standard batteries or cable

Double hydraulic, telescopic fly jib

  • hydraulic telescoping of the first and second folding top elements via the radio remote control
  • simultaneous extension of both drawers ensures optimum load distribution
  • utilization of the folding tip even in narrow body situations thanks to "extending in the air"
  • hydraulic telescoping also in stage operation
Video: double hydraulic, telescopic fly jib

Endlessly rotatable

  • high-quality turntable from German brand manufacture
  • well thought-out rotary guide enables endless rotation of the upper carriage in both directions
Video: Endlessly rotatable

Personal safety mode

  • personal safety mode in accordance with BG guidelines
  • for working at great heights without stationary securing options such as scaffolding or safety eyes
  • securing of persons by crane boom allows free working at exposed places

Optional equipment

Battery-powered electric motor

  • silent and flexible thanks to modern battery technology
  • energy-efficient crane control and large 70 kWh battery system for long operating times
  • charging of the energy storage system via 230-volt socket, high-voltage current or via a wallbox for electric cars
  • working platform operation via battery possible

Mounting-/glass hook

  • assembly hook enables precise material transport
  • application area: e. g. glass mounting with vacuum lifter
  • flexibility in length and tilt angle facilitates difficult installations

Accessory fix system

  • accessories are securely stored and immediately within reach
  • no cumbersome lashing necessary
  • custom-fit holders ensure safety on the road
  • crane equipped with fitting brackets

Working platform

  • The crane can be converted to a fully-fledged working platform in less than 5 minutes.
  • with 230 V socket and standardised lashing points for securing persons
  • The working platform can be swivelled left and right by 45° to either side.

Technical specifications

Hook load (stand./opt.)3.0 /5.0 t
Hook height39.2 m
Total weight1≥ 18 t
Boom length39.20 m
Outrigger width (min.)3.34 m
Outrigger width (max.)5.94 m
Winch capacity3,000 kg
Boom (3,000 kg - 1,500 kg)5.40 - 12.04 m
Extension 3 (350 kg)13.78 m

Working range

LoadRangeHeight
3,000 kg7.50 m25.80 m
2,000 kg15.00 m21.00 m
1,000 kg25.00 m15.50 m
500 kg29.00 m16.50 m
350 kg33.00 m9.00 m
5t-Funktion
5,000 kg6.50 m8.20 m
4,000 kg7.50 m5.20 m

Working range diagrams

Crane operation (values depending on truck)
Platform operation (HA 3/450, values depending on truck))

Your sales contact person

+49 (0) 2593 – 95 92-5002

Subject to technical changes. All dimensions are approximate. The right is reserved to alter the functions and performance. The information reflects the appliance performance at the time of publication.1 dependent on truck type